Jina AI MCP Tools

Web search and page reading for coding agents. Two tools, no tool-catalog buffet.

jina-mcp-tools is an unofficial, deliberately small Model Context Protocol (MCP) server built on Jina AI Reader and Search.

It gives Codex, Claude Code, and other coding agents the two web capabilities they usually need while programming:

• Find a small set of relevant pages.
• Read the pages that actually matter.

That is the whole menu. No embeddings, screenshotting, image search, classification, reranking, or PDF archaeology. Those are useful tools—just not always useful tools to carry into every coding session.

[!NOTE]

This is an unofficial community project. It is not affiliated with or endorsed by Jina AI, and it uses Jina AI APIs rather than replacing them.

Why Another Jina Integration?

Jina already provides an excellent official MCP server and official CLI. They are designed to expose a broad range of Jina capabilities. This project makes a different tradeoff: it treats context space and tool-selection attention as resources worth saving.

MCP tool definitions typically enter an agent's context before the real work begins. A broad catalog is valuable when the agent needs it; for everyday programming research, it can be more menu than meal. jina-mcp-tools exposes at most two focused tools and follows one deliberately boring workflow:

1. Search the web and receive a short list of results.

2. Pick the useful URLs.

3. Read those pages, one manageable page at a time.

4. Get back to the code.

Boring infrastructure is often very considerate infrastructure.

Which Jina Integration Should I Use?

Choose **jina-mcp-tools** when native MCP integration, a minimal default tool surface, and paginated reading matter most.

Choose the official MCP server when you want a hosted endpoint or need its wider capabilities. It can also be narrowed with include_tools or include_tags, which is a good option when hosting convenience matters more than running a local process.

Choose the official CLI when your agent already has reliable shell access and you want Unix composition or the full Jina API suite without registering a large MCP catalog.

Quick Start

Prerequisites

• Node.js 20 or later.
• A Jina AI API key for web search. The reader works without a key, subject to Jina's unauthenticated rate limits.

Set the API key in your shell if you want both search and reading:

export JINA_API_KEY=jina_your_api_key

Codex

codex mcp add jina-web --env JINA_API_KEY="$JINA_API_KEY" -- npx -y jina-mcp-tools

Claude Code

claude mcp add --scope user \
  --env JINA_API_KEY="$JINA_API_KEY" \
  --transport stdio jina-web -- npx -y jina-mcp-tools

Omit the API-key option from either command for reader-only mode.

VS Code

VS Code stores MCP configuration in a user-profile mcp.json or a workspace-level .vscode/mcp.json. Its configuration uses servers, not mcpServers. This example securely prompts for the API key and stores it using VS Code's input-variable support:

{
  "inputs": [
    {
      "type": "promptString",
      "id": "jina-api-key",
      "description": "Jina AI API key",
      "password": true
    }
  ],
  "servers": {
    "jina-web": {
      "type": "stdio",
      "command": "npx",
      "args": ["-y", "jina-mcp-tools"],
      "env": {
        "JINA_API_KEY": "${input:jina-api-key}"
      }
    }
  }
}

Open the user configuration with MCP: Open User Configuration, or save the file as .vscode/mcp.json to share the server configuration with a workspace. Remove env and inputs for reader-only mode.

For a reader-only user-profile installation from the command line:

code --add-mcp "{\"name\":\"jina-web\",\"type\":\"stdio\",\"command\":\"npx\",\"args\":[\"-y\",\"jina-mcp-tools\"]}"

Claude Desktop, Cursor, and Other MCP Clients

For clients that use the mcpServers JSON format:

{
  "mcpServers": {
    "jina-web": {
      "command": "npx",
      "args": [
        "-y",
        "jina-mcp-tools"
      ],
      "env": {
        "JINA_API_KEY": "your_jina_api_key_here"
      }
    }
  }
}

The default transport is stdio. Remove the env block for reader-only mode.

Available Tools

jina_reader

Extract and read content from a web page.

Parameters:

• url — URL to read (required).
• page — Page number for paginated content (default: 1).
• customTimeout — Timeout override in seconds (optional).

Designed for coding-agent research:

• Automatically paginates large documents instead of returning one oversized response.
• Keeps an LRU cache so later pages of the same URL are available immediately.
• Converts GitHub file URLs to raw content URLs.
• Tries direct Accept: text/markdown retrieval for a maintained allowlist of documentation and blog hosts, then falls back to r.jina.ai if the response fails or is empty.

The default cache holds 50 URLs, and each page is limited to approximately 15,000 tokens. Both values are configurable.

jina_search / jina_search_vip

Search the web and return a lightweight shortlist. Use jina_reader to retrieve the full content of promising results. A Jina API key is required.

Only one search tool is registered, depending on --search-endpoint:

• jina_search uses s.jina.ai (standard, the default).
• jina_search_vip uses svip.jina.ai (vip).

Parameters:

• query — Search query (required).
• count — Number of results (default: 5).
• siteFilter — Limit results to a domain such as github.com.

The small default result count is intentional: search first, read selectively, and leave some context for the repository you were working on in the first place.

Configuration

Usage: jina-mcp-tools [options]

Options:
  --transport          Transport type (default: stdio)
  --host                     Host/interface in HTTP mode (default: 127.0.0.1)
  --port                  HTTP port (default: 3000)
  --tokens-per-page  Tokens per reader page (default: 15000)
  --search-endpoint  Search endpoint (default: standard)
  --cache-size       Reader cache size in URLs (default: 50)
  -h, --help                       Show the built-in help

HTTP Transport

HTTP mode is intended for self-hosted deployments or clients that cannot spawn a local stdio process.

Start the server:

# Search and reader
JINA_API_KEY=your_api_key npx -y jina-mcp-tools \
  --transport http \
  --host 127.0.0.1 \
  --port 3000

# Reader only
npx -y jina-mcp-tools --transport http --port 3000

Connect to http://localhost:3000/mcp:

• Codex: codex mcp add jina-web --url http://localhost:3000/mcp
• Claude Code: claude mcp add --transport http jina-web http://localhost:3000/mcp
• MCP Inspector: npx -y @modelcontextprotocol/inspector
• VS Code: code --add-mcp "{\"name\":\"jina-web\",\"type\":\"http\",\"url\":\"http://localhost:3000/mcp\"}"

HTTP Security

HTTP mode binds to 127.0.0.1 by default. For a remote deployment, put the server behind TLS and require a bearer token:

JINA_MCP_HTTP_AUTH_TOKEN=change-me \
  npx -y jina-mcp-tools --transport http --host 0.0.0.0 --port 3000

Clients must send:

Authorization: Bearer change-me

Browser-origin requests are limited to localhost by default. Set JINA_MCP_ALLOWED_ORIGINS to a comma-separated allowlist for browser-based remote clients.

Running the MCP process locally does not make Jina requests offline: search and most reader requests still call Jina AI services. Some allowlisted markdown hosts and GitHub file URLs may be fetched directly.

Proxy Environment Variables

To route outbound requests through a proxy, enable Node's proxy environment support and provide the proxy URLs:

NODE_USE_ENV_PROXY=1 \
HTTP_PROXY=http://127.0.0.1:7890 \
HTTPS_PROXY=http://127.0.0.1:7890 \
NO_PROXY=localhost,127.0.0.1,::1 \
npx -y jina-mcp-tools

For MCP clients that use the mcpServers configuration format, include the same environment variables:

{
  "mcpServers": {
    "jina-web": {
      "command": "npx",
      "args": ["-y", "jina-mcp-tools"],
      "env": {
        "JINA_API_KEY": "your_jina_api_key_here",
        "NODE_USE_ENV_PROXY": "1",
        "HTTP_PROXY": "http://127.0.0.1:7890",
        "HTTPS_PROXY": "http://127.0.0.1:7890",
        "NO_PROXY": "localhost,127.0.0.1,::1"
      }
    }
  }
}

Alternatively, start Node with NODE_OPTIONS=--use-env-proxy. Proxy URLs are only used when proxy environment support is enabled.

Scope and Non-Goals

This project intentionally does not aim to expose every Jina API. It is not the right choice when you need embeddings, reranking, classification, screenshots, image or academic search, query expansion, deduplication, or structured PDF extraction. Use the official MCP server or CLI for those jobs.

The narrow scope is the feature. If this server grows twenty tools and develops a small cockpit, something has gone terribly wrong.

License

MIT

Links

• GitHub: github.com/PsychArch/jina-mcp-tools
• Issues: github.com/PsychArch/jina-mcp-tools/issues